Skip to content
DraperyFlow

Blog

Lining types for custom drapery: a workroom guide

· DraperyFlow

Face fabric is what the client points at. Lining is what makes the pair hang, last, and darken the room. A workroom that treats lining as “whatever ivory we have on the shelf” will sew the wrong hand, buy the wrong yards, and argue about light gaps after install. Spec the layer stack on the treatment the same way you spec the heading.

This guide is the shop view: what each lining type is for, how it sits in the build, and how it should show on the cut list and the quote — not a consumer fabric glossary.

Standard drapery lining

Cotton or poly-cotton sateen (and similar cotton-rich linings) is the default second layer behind most custom pairs. It protects the face from sun, gives a clean reverse at the glass, and adds enough body for a pinch pleat or ripplefold to train. Color is usually ivory, white, or ecru so it reads neutral from outside; match the face family when the reverse will show in a night reflection.

Buy lining as its own cuts. Most linings have no vertical repeat. Do not round lining to the face-fabric repeat. If the face needs five widths at 122.5 inches because of a 24.5-inch motif, the lining is still five widths at the base cut (finished length plus hems) unless your shop’s method says otherwise. Over-ordering lining “to match the face ticket” is one of the quietest inventory leaks in a workroom.

Interlining (bump)

Interlining sits between the face and the lining. It is the layer that gives a silk or a light linen real weight: softer fold, better insulation, less show-through, a more expensive hand. Flannel-weight bump is common in US shops; heavier “bump” or thermal interlinings show up on formal rooms and cold glass.

Interlining changes labor as much as materials. Extra cutting, more needle time, a fuller stack on the rod. If the quote only says “lined” and the work order suddenly shows bump, the hours will not match the price. Put interlining on as its own material line and a labor SKU that assumes that build — not the unlined or standard-lined rate.

Blackout lining

Blackout is for bedrooms, media rooms, and any living-room glass that fights a screen. It is a coated or laminated lining (or a dedicated blackout cloth) meant to kill light, not just soften it. Standard sateen is not blackout. Triple weave and dim-out sit in between: useful for privacy and glare, not for a true dark room.

On the table, blackout is stiffer, heavier, and less forgiving at the hem. Seams and needle marks show. Returns and overlaps matter more because light leaks at the edges, not through the cloth. Spec the mount and the return on the install sheet when blackout is on the job. A perfect blackout pair on a rod that stops at the casing will still glow at the sides.

Thermal and performance linings

Thermal linings add insulation for large glass and HVAC-heavy houses. Some performance faces already carry a backing; do not automatically double-line them without checking hand and stack. South and west elevations often want more protection for the face than a north bedroom needs. Write the elevation into the notes so the next estimator does not copy last month’s “standard lining” onto every window.

Self-lined and unlined

Self-lined means the reverse is the same cloth, or a designed reverse, with no separate lining layer — common on some sheers and specialty weaves. Unlined is a deliberate choice: open sheers, a fashion linen the client wants translucent, a summer layer behind a dress pair. Unlined is not “we forgot the lining.” Put it on the spec so nobody “fixes” it in production.

Unlined fashion goods on hard sun will fade and go limp. If the client insists, note UV and longevity on the quote. The workroom’s job is to make the risk visible before the COM is cut.

How layers sit in the build

Room side to glass, a full formal stack is usually: face → interlining → lining (or blackout as the innermost layer, depending on shop method). Do not invent a new order mid-job. The work order should name each layer, the yards, and the cut length — not “lined as usual.”

  • Face: pattern, railroaded or up the roll, repeat-rounded cuts when needed.
  • Interlining: same widths as the face in most shops; no pattern match.
  • Lining / blackout: same widths; rarely a repeat; check usable width on coated goods.
  • Labor: heading plus every layer you asked the table to sew.

Yardage and the PO

Each layer gets a buy. Face may be COM. Lining and interlining are often workroom stock or a separate mill order. Receiving should confirm each bolt against the PO, not assume “the ivory” is the ivory on the ticket. Side marks on the table should name the layer so bump does not get sewn as the face reverse.

In DraperyFlow, lining, interlining, and blackout are separate layers on Pricing & Fabric — from inventory or entered by hand — and they feed the invoice with the face goods. Inventory keeps lining / interlining as its own tab so width and stock are not buried inside a fabric SKU.

What to put on the quote

The client does not need your vendor SKU. They do need to know whether the pair is lined, interlined, or blackout — because that is what they feel and what they pay for. Materials as lines; labor as a rate that matches the build. A lump “make-up” that ignores bump will look fine until the next silk job arrives.

If you are still deciding how much extra face fabric to buy for a repeat, or how to hang the finished pair so blackout actually works at the wall, those notes sit next to this one on the blog.

Try the full workroom for 14 days.

All-in-one workroom management software. Full Studio trial, no credit card. Keep Starter or Studio when you are ready.