Skip to content
DraperyFlow

Blog

Drapery workroom software: what the shop actually needs

· DraperyFlow

Most drapery shops do not have a software problem in the abstract. They have a handoff problem. Yardage lives in a spreadsheet. The spec is a Word file or a PDF from last year. The invoice is a different app. The workroom still writes cuts on paper. When those tools disagree, the floor is the one that finds out — usually after the bolt is cut.

Drapery workroom software, sometimes called workroom management software, is the system that keeps that chain in one place: calculate, spec, produce, invoice. It is not a generic contractor CRM with a window-treatment label. It is not only a yardage calculator. If the math cannot become a work order, and the work order cannot become an invoice, you still have the same shop you had on Excel.

What workroom software is for

A custom drapery or upholstery workroom sells a manufactured product. The inputs are finished sizes, fabric width, vertical repeat, fullness, hems, lining, and hardware. The outputs are yardage, a cut list, a work order the table can sew from, an install sheet the crew can hang from, and an invoice the client will pay. Management software is whatever keeps those outputs consistent across the job.

That is a different job from dispatch software, which tracks trucks, or from a generic CRM, which tracks people. Dispatch does not know a vertical repeat. A CRM does not receive a COM bolt against a purchase order. If your “system” cannot hold a treatment — one window, one product, one fabric — it will force you back into side files.

Calculator-only tools are not enough

A good fabric calculator is necessary. It is not sufficient. Shops that stop at the calculator still retype the result into a quote, then again into a work order, then again into an invoice. Each retype is a chance to drop a repeat, change a hem, or invoice a different yardage than the floor cut.

The test is simple. After you calculate a pair of pinch-pleat panels or a flat roman, can the same specs become:

  • A work order with fabric, cuts, lining, and hardware — and no pricing on it.
  • An install sheet with finished size, mount, and site notes — and no cut list on it.
  • An itemized invoice or quote PDF the client can approve.

If those three documents are still assembled by hand, you have a calculator. You do not yet have workroom software.

What belongs in one system

For a US or UK custom shop, the minimum stack is the path the job actually takes. DraperyFlow is built around that path, not around a generic project board.

Yardage and pricing on the treatment

Six product calculators — drapery panels, roman shades, cornice / pelmet, pillows, bedding, and custom — with specs first, then pricing and fabric. Inventory can fill width and repeats. COM can be entered as custom. Lining and hardware sit on the same treatment so the invoice total is not a separate guess.

Project, room, then window

A house is not one line item. Status belongs on the treatment: draft, awaiting materials, ready for production, in production, finished. One roman can wait on COM while the dining panels are already on the table. Files — site photos, sketches, signed paperwork — stay on the project, not in a text thread.

Work orders, install sheets, and the invoice

The floor should not see retail. The crew should not see cuts. The client should not see workroom cost. Those are three PDFs from the same rooms. When they are generated from the same treatments, the shop stops reconciling three versions of the truth.

Materials, time, and the calendar

On a full studio, inventory, purchase orders, and receiving close the COM loop. Production and time logs feed job cost. Measure and install sit on a calendar, not only in someone’s head. A client portal can send the estimate as a link — approve, without a login — so the designer is not chasing a PDF in email.

Who it is for — and who it is not

Workroom management software is for shops that cut, sew, and invoice custom textiles: drapery workrooms, interior designers who specify treatments and send them to a workroom, and upholstery shops that run the same kind of job. Units should be imperial or metric. Currency should not be locked to one country. The vocabulary should be yardage, repeats, COM, work orders, and receiving.

It is the wrong category if you need field-service dispatch, a point-of-sale for ready-mades, or a general contractor schedule. Those tools will not calculate a railroaded roman, and they will not print a work order the table will trust.

How to judge a system before you switch

Ignore the homepage until you have walked one real window through the product. Use a job you already lost money on, or a COM silk with a large repeat. Then ask:

  • Does the calculator know the product — panels versus romans — or only a generic width and drop?
  • Do repeats, railroaded goods, and hems change the cut length, or only a comment field?
  • Can you download a work order with no prices, and an invoice with no cuts, from the same room?
  • If a designer sends COM, can you raise a PO and receive the bolt against it?
  • When the client approves, does status move on the job, or only in someone’s inbox?

If the answers are no, you will rebuild Excel around the new tool. That is not a software upgrade. It is a second system.

A practical next step

DraperyFlow is all-in-one workroom management software for that shop: calculators through invoice, with work orders and install sheets in between. Starter covers calculator, clients, projects, invoices, and the two floor PDFs. Studio adds team, inventory, receiving, calendar, board, portal, and job cost. The trial is 14 days of full Studio, no credit card.

If you are still deciding who should own the yardage on a trade job, or you need the roman math in writing for the floor, those notes are on this blog as well.

Try the full workroom for 14 days.

All-in-one workroom management software. Full Studio trial, no credit card. Keep Starter or Studio when you are ready.